window print this document
SPLICE PIPE PILING WITHOUT DOWN-TIME FOR WELDINGCOMPARE
THE ADVANCE SPLICER TO BUTT WELDINGThe internal taper of the sleeve
swages the pipe into a tight friction joint, bearing on a square shoulder ledge.
Hammer blows force both ends of pipe into compression in the taper creating a
dependable splice with adequate lateral strength. There is no production delay
with the use of the splicer. It can be placed on the driven pile faster than the
next length can be picked up. Easy starting is assured by the taper; even a
hammered end slips quickly into the sleeve.
Driving can be done on the Splicer. This is
especially advantageous on thin wall pipe, where the sleeve acts as a driving
head to reduce crippling.The Drive-on
Splicer is a proven economy on the job, adding many piles per day to
Cut costs and speed installation by
eliminating non-productive time of butt welding pipe piles.
Taper provides for quick positioning of next
length and then forces a tight friction fit for any size of pipe.